Plot > Strain > Value > εElastic

  Plot > Strain > Value > εPlastic

  Plot > Strain > Value > εTotal

Selects the elastic, plastic or total strain component.

These components can be accessed via the Strain Components toolbar as follows:

This toolbar can be changed to a vertical orientation by dragging is against either the right or left hand edge of the main window.

It can be changed back to a horizontal orientation by dragging is against either the top or bottom edge of the main window.

Selecting the button on the Contours toolbar activates the Stress Components toolbar.

You can add this button to the Contours toolbar using the configuration button.

For details, refer to

Mohr-Coulomb in 3D FF blocks.